Through Circulation Dryer
TCD-150
Hot air conveyor dryer is a kind of conveyor belt material is placed, with the adoption of the tunnel during the contact with hot air to dry, conveyor dryer by the conveyor belt, blower, heater and other components.
The main function of this machine is to dry the powder to be the granule when it comes to watery or alcoholic
powders of which the structure is that all in compliance with cGMP.
As for the drying, it is at a low temperature of approximately below 40~70℃ in which could be Setting lower
in case of volatile alcohol products.
Owing to the internal hot air circulation, automatic humidity control of the exhaust outlet and the electrical
control, the drying room will then keep and maintain a well distributed temperature where the granular product
would achieve a great effect upon dehumidification while drying.
Under a normal regulation via the internal manual control over the air volume baffle, the tolerance of each
point on heat distribution is at ± 3℃ from the drying temperature 40~70℃ while the no-load test as drying.
Concerning the drying time, it depends on the different temperature set.
Features
- Easy to move, cut down time and labor cost.
- Use inverter to control drive speed smoothly, quality stable. Good heat insulation, good temp distribution, saving energy.
- Depends on customer demand, support various layout and convey design. Can select different type of convey belt also.
Applications
- For Product backing / Drying / Tin solder heating / Preheating etc. Able to be connected with other Auto-line equipment.
- Suitable for chemicals, foods, pigments, dyeing materials, pesticides, synthetic resin medicine, fiber, grain
- particles, stomach medicine powder, garlic and seafood, etc.
Specification
- • Drying high efficiency, save time and labor cost, the time faster than general oven 3 times or more.
- • Drying big capacity, low energy consumption loss, and machine easy to install and clean.
- • Suitable for various products drying both powder objects and grain particles etc.
- • Adjustable damper in the chamber, whole chamber temperature heat distribution very uniformly.
- Air pass product high penetration, never change plate place.
- • Can dry inflammable product (mix alcohol).
- • Inlet make filter device, to ensure product quality.
- • Adopt PLC control system, easy operate and maintain.
Construction & Structure
- • Heating equipment uses either heater or steam source.
- • Make high-speed circulation fan motor.
- • Tray type or trolley type option.
- • Automatic outlet exhaustion damper device, control by product humidity.
- • Body have explosion proof safety door.
- • Electric circuit has over temperature, motor and belt etc. abnormal protection action.
- Gallery
Through Circulation Dryer - Through Circulation Dryer | Taiwan-Based Pharmaceutical & Biotech Manufacturing Equipment Manufacturer | E CHUNG MACHINERY CO.
Located in Taiwan since 1975, ECMC (E CHUNG MACHINERY CO.) has been a pharmaceutical and biotech processing equipment manufacturer. Main products, including Through Circulation Dryer, autoclaves, WFI, water systems, pure steam generators, superheat water sterilizers, vial washing machines, tunnel sterilizers, and, in particular, hot air and steam sterilizers.
ECMC (E CHUNG) company is a professionl experienced manufacturer in the pharmaceutical sterilization industry more than 48 years so that our customers located worldwide. Sterilization machines are manufactured in line with current international standards (EU standards, US standards, GMP and GAMP, etc.).
ECMC (E CHUNG) has been providing customers high-quality cGMP pharmaceutical and biotech processing equipment, both with advanced technology and 48 years of experience, ECMC (E CHUNG) ensures each customer's demands are met.